Selective Pallet Racking
The most versatile layout for distribution centers: every pallet is directly accessible with a standard counterbalance forklift.
Pallet racking, mezzanines and shelving — designed for local pallets, seismic loads and Caribbean climate.
Search by product, application or warehouse requirement
From conventional selective racking for Santo Domingo distributors to semi-automated shuttle systems for free-zone factories — each system is specified around your pallets, forklifts and building.
The most versatile layout for distribution centers: every pallet is directly accessible with a standard counterbalance forklift.
Stores pallets two deep to remove aisles — a strong fit for beverage and consumer goods with several pallets per SKU.
Very narrow aisles for sites where land and building height are costly — more pallet positions per square meter.
Forklifts enter the lanes for maximum density of homogeneous products — widely used in cold rooms and frozen food.
Nested carts on inclined rails store 2–5 pallets deep per lane, all loaded and picked from a single aisle.
A remote-controlled shuttle moves pallets inside deep lanes, combining high density with FIFO or LIFO flow.
Stacker cranes and warehouse software for high-throughput, labor-efficient operations in high-bay buildings.
Arm-type racking for rebar, pipe, lumber and aluminum profiles — common in hardware stores and building-material yards.
Adds a second or third working level for picking, packing or offices without expanding the building footprint.
Hand-loaded shelving with wide spans for cartons, archives and spare parts, with steel or board decks.
A balanced option between light shelving and pallet racking for e-commerce, pharmacy and parts storage.
Galvanized mesh decks that support pallets and cartons, let sprinkler water pass through and keep goods visible.
No exact match for your search. Our engineers can still recommend a layout — contact us or .
What Dominican distributors, bottlers, 3PL operators and free-zone manufacturers ask us about most often.
Each sector stores differently. We match rack type, finish and load capacity to how your products move.
Rum, beer, bottled water, dairy and imported groceries need high-density lanes, strict FIFO for expiry dates and corrosion-resistant finishes in cold rooms.
Typical fit: drive-in, radio shuttle, double deep
Logistics operators along the Caucedo–Santo Domingo Este corridor handle changing clients and SKU mixes, so flexible selective layouts and fast reconfiguration matter.
Typical fit: selective, narrow aisle, wire decking
Medical device, textile, electrical and tobacco plants in Dominican free zones need raw-material buffers, line-side shelving and extra floor area above production.
Typical fit: mezzanine, medium duty, push back
Rebar, PVC pipe, lumber and aluminum profiles are long and heavy — stored safely on cantilever arms indoors or in covered yards.
Typical fit: cantilever, selective
Supermarket and pharmacy chains serving Santo Domingo, Santiago and the East need fast replenishment, carton picking and full pallet access.
Typical fit: selective, long span, medium duty
Cocoa, banana, coffee and produce exporters need ventilated, humid-climate-ready storage close to packing lines and container loading.
Typical fit: selective, drive-in, wire pallet
A rack that performs in a temperate climate is not automatically right for Hispaniola. These are the factors we check on every Dominican project.
Frame bracing, base plates, anchors and height-to-depth ratios are checked against EN 15512 and RMI/ANSI MH16.1, with load data supplied so your local engineer can verify R-001 compliance.
Powder-coated or galvanized finishes for coastal sites in Haina, Boca Chica and Puerto Plata, semi-open sheds and cold rooms with condensation.
Beams and frames are dimensioned for 48″ × 40″ GMA pallets common in US-linked trade, as well as 1200 × 1000 mm and Euro pallets.
Bay-labeled packing for container delivery to Caucedo, Haina or Puerto Plata, plus racking installation guidance and load signage.
Accurate input means a safe, efficient design the first time. This is the information our engineers use.
You receive a layout drawing, pallet-position count and structural load data, with options compared side by side.
Components are manufactured, finished, packed by bay and shipped to your Dominican site with installation documentation.
Racking distributors in the DR: if you resell standard racking, simply send your regular material list — no drawing needed.
Density and selectivity always trade off. Use this guide as a starting point before a full layout study.
| System | Storage density | Pallet access | Inventory flow | Best for in the DR |
|---|---|---|---|---|
| Selective | Baseline | Every pallet | Any (FIFO possible) | Distributors with many SKUs |
| Double Deep | Medium–high | Front pallet first | LIFO | Bottlers, FMCG importers |
| Narrow Aisle | High | Every pallet | Any | High-bay buildings, costly land |
| Push Back | High | Per lane (2–5 deep) | LIFO | Fast-moving multi-pallet SKUs |
| Drive-in | Very high | Per lane | LIFO (FIFO if drive-through) | Cold rooms, seasonal stock |
| Radio Shuttle | Very high | Per lane, shuttle-assisted | FIFO or LIFO | Food with expiry control |
| AS/RS | Highest | Automated | Software-controlled | High-throughput, 24/7 sites |
Yes. Hispaniola is seismically active, so every layout is reviewed for frame bracing, base plates, floor anchors and height-to-depth ratio. Calculations follow international racking standards such as EN 15512 and RMI/ANSI MH16.1, and we provide full load data so your local structural engineer can verify compliance with the Dominican R-001 seismic regulation.
Most Dominican importers and distributors use 48 × 40 in (1219 × 1016 mm) GMA pallets because of strong US trade links, while goods from Europe often arrive on 1200 × 800 or 1200 × 1000 mm pallets. We size beam length, frame depth and clearances to your real pallet, load height and maximum weight.
Components receive an electrostatic powder-coat finish, and galvanized options are available for coastal sites, semi-open warehouses and cold rooms where condensation is frequent.
Racking is packed by bay and component type, labeled to match the layout drawing and shipped in containers to Dominican ports such as Caucedo, Haina or Puerto Plata. Lead time depends on volume and finish and is confirmed together with your layout.
Yes. We supply installation drawings and manuals, offer on-site installation or supervision options, and provide load signs and post-installation inspection guidance. See our racking installation page for details.
Pallet dimensions after loading (H × W × D), maximum pallet weight, building dimensions (length × width × clear height) with column and door positions, the number of storage levels required and the forklift type you use. Racking distributors can simply send a material list.
Send your pallet data and building layout — our engineers will propose the most efficient storage system for your site.
[email protected]